Разница между однокомпонентной и двухкомпонентной краской для дорожной разметки.

There are one-component paint and two-component paint for road marking. One-component paint is usually ready-to-use, and it can be film-dried by evaporation of solvents or by direct reaction with certain substances in the air, such as moisture.

On the contrary, the two-component paint is generally used by mixing A and B in a certain proportion. It is cured by a reaction between the two materials, then a certain thickness of film is formed in the base plane.

The two type краска для дорожной разметки are easily confused. For the one-component paint, put the high solid content paint (the resin is also pre-polymerized) into two barrels, then add initiator (or curing agent), and use two-component equipment for construction.The spray thickness can be reach 600-800μm, drop the reflective glass beads on the paint surface is also available. Moreover, it is very close to the smell of two-component paint. But there are some differences in their lift time and reflective properties.

Therefore, when purchasing two-component road marking paint, you could ask for the product technical data sheet to avoid loss.

Tory has developed a two-component road marking paint with superior adhesion and surface strength based on the characteristics of ММА смола. If you have the same demand on two-component paint development, please feel free to contact Аньхойский тори.