Long-lasting wet night road marking made by RI 1.7 glass beads Road markings provide continuous guidance information for drivers. According to Chinese national standards, rainy night marking should have retroreflective performance under dry, wet and continuous rainfall conditions, and have a good visual recognition effect on rainy nights. At present, the rainy night marking test sections set up by many provinces and cities in China are all relying on the road ceramic glass beads (AW element) to achieve rainy night reflective performance. There is no rainy night markings with reflective performance lasting more than 3 months under wet or continuous rainfall have not been found. Cntory reflective glass beads, reflective road paint material always used for rainy night marking. In order to overcome this problem, Shandong Highway proposed a ‘long-lasting life cycle reflective road marking’. From the construction of the marking to the end of the marking life (average daily traffic flow of 80,000, more than 4 years), it maintains good reflective performance under dry, wet, and continuous rainfall conditions, which is the first in China. The detailed information of the trial section, 1. Retroreflectivity -- Dry: 730-820mcd, Wet: 280-400mcd. 2. Paint - thermoplastic. 3. Drop on and quantity-- 600g/m2 in total, 300g HR beads of type B, 300g 1.7 index beads of Type DHR. Using two dispensers, 1st one for Type B and 2nd one for DHR. 4. Intermix and quantity -- total quantity is 30% of thermoplastic, 15% of HR beads 0.3-1.4mm, 15% of 1.7 index beads 0.3-1.4mm. Tory is a specialist manufacturer of traffic safety remarking materials. We focus on research, development and production, only to provide high quality products, including MMA resin, reflective vertical object marking paint (liquid reflective film), reflective glass beads, anti-slip reflective aggregates,get details from www.cntory.com.

Tory have participated in 2020 Beijing Intertraffic on Jun 18-20 successfully, booth number is W1C51. Below products were show on our booth : DHR Glass Beads AW reflective element Reflective paint AASHOT Type 2 glass beads (MR glass beads) And new product RI 1.7 glass beads Thanks for your visiting, if you need the detailed product information, please contact us: Email: sales@cntory.com Tel: +86 0552 7165551

After 5 weeks closing due to Corona Virus, Tory has opened and start work from March 1st, our first batch of workers back to work was 20 people mainly from production department and a few office workers. We have made our own prevention and control plan according to Bengbu government requirement, firstly make sure every worker’s working condition, and keep a clean and safe production environment. Mainly according to following points: 1. Purchase supplies for prevention and control like mask, disinfectant, rubber gloves, hand-sanitizer, temperature measuring gun ect. 2. Every workers should wear mask. 3. Washing hand and step into the sterilizing container, measure temperature before entering factory. 4. Disinfect the office area and workshop with 75% alcohol twice a day. In the past two weeks, the factory is running good and orderly, we will proceed and continue according to the prevention and control plan, till the virus ended.

China 3 Grade Reflective Thermoplastic Roadmarking Inter mix and drop on glass beads: Type 3 (0.85-1.4mm) Location: G3 Jingtai Highway

3 Grade(350mcd) dry and wet continuous thermoplastic reflective roadmarking. Glass beads size: AASHTO Type 3 (0.85-1.4mm) Location: Zhejiang Changxing, China

Tory's internal standard "Reflective marking paint for vertical object" has been approved. As the first company to research and promote reflective paint to market, we drafted the standard and used it as a reference document for China's reflective paint standard. Note: The quality control of reflective paint will follow this standard.