How to increase the spray thickness of 2-component MMA paint?   The two-component sprayed reflective road marking line is generally only used for the renewed of city roads, and the thickness is normally like 0.6-0.8mm (actually about 0.5mm). No matter how high is the strength of the paint, the thickness is not enough for roads with large traffic.   How to maximize the performance of the two-component sprayed reflective road marking line, to meet the project requirements, but also ensure the construction thickness and reduce the construction cost?   1. The amount of spray coating per square meter is 1.0~1.5 kg, and it is equipped with a double glass bead dispenser (or spray spreader).   2. The amount of glass beads drop on the surface is not less than 0.45 kg, and the amount of premix glass beads is not less than 0.5 kg (or 30% by weight of the paint)   3. Basic ratio: 1 square meter with 1 kg glass beads (there is some loss, the actual application is 0.85KG)   4. The particle size distribution of glass beads: about 0.4~1.0mm for drop on, and about 0.85-1.4mm for the intermix.   5. Thickness the road marking paint: ≥1.2mm   6. The retroreflectivity data is basically above 400mcd.

Sichuan Taoyuan to Bazhong Highway Project JA1. MMA Two-Component Screed Paint For Rain Night Reflective Road Marking Intermix and drop on TORY HR series glass beads to ensure the continuous reflective effect of the road marking lines during the longer life time. Mix 40% of AW element to improve the retroreflectivity in wet condition. HR(high level reflective RL≥500mcd) glass beads(spheres) offer high level of reflectivity for road marking line, apply for thermoplastic, MMA, waterborne paint, epoxy, polyester, polyurethane, polyurea paint, intermix, premix or drop on. AW reflective element is mainly for wet night condition, reasonable optical design provides superior retroreflectivity for road marking line, element combined by a core bead and hundreds of non-transparent high refractive index micron beads. MMA resin is the main material for 2-component paint, generally curing time is adjustable from 15-40min, 2-component paint is always have longer life time than thermoplastic paint, and easier to achieve high retroreflectivity. Project Technical Data Sheet: Condition White Rain Night Road Marking Line Yellow Rain Night RoadMarking Line DRT ≥500mcd ≥300 WET ≥260mcd ≥160 CONTINUOUS RAIN FALL ≥150mcd ≥100 Construction photos and of MMA Two-Component screed paint for rain night reflective road marking lines.

Reflective Paint in Shenzhen City -- Community Curbs Vertical Reflective Markings 0~180ºAngle Reflectivity in Rainy Night Application Cases of Vertical Reflective Marking Paint in Shenzhen Community Available for color customization: White, Yellow, Green, Blue, Red... Comparison during day and night, the reflelctive performance: Key words: Traffic safety signs paint Water based marking paint Reflective paint for metal

Generally, the construction temperature control of thermoplastic paint is directly affects the sedimentation of glass beads, and the sedimentation depth directly affects the retroreflectivity of the marking.  Can we widen the construction temperature range of thermoplastic paint, so that the operator no longer deliberately controls the temperature of roadmarking machines, and then the glass beads can sink into paint with a reasonable state? --of course yes!      A group of tests data of sedimentation of glass beads at 190℃, 200℃, 210℃, 220℃ and 230℃ respectively when the paint temperature is controlled: From the above test, the glass beads did not sink as the temperature increased. If you are interested in, hurry up and do the test by yourself thermoplastic paint. Make the constructioneasier!

Tory upgraded HR series 700 glass beads, the retroreflectivity can easily reach 600-700mcd. Application range: drop on or premix Application paint: MMA paint (two component cold plastic paint) Thermoplastic paint Waterbone paint

The smaller size of all weather glass beads is designed for city roads with thinner film of roadmarking, to achieve high retroreflectivity in wet road rainy night. Test material: All weather glass beads size: 0.5-0.7mm Virgin glass beads: 0.4-0.85mm Quantity: 500g/m2 (element-200g, glass beads-300g) Test paint: waterborne paint Test result: Dry: 5.8cd Underwater: 3.6cd Sample plate (All weather glass beads mix with virgin glass beads): 552-632mcd All figures comply with KS standard. (Below are test pictures) Sample plate: Test in dry: Test under water: