Reflective Glass Beads for Paint Are Necessary When It Comes to Improving Night Visibility of Road Marking Lines.
During
the line striping process,reflective glass beads for road
marking paint is a crucial and inseparable part. However, many people do
not clearly know the importance of these beads. It’s impossible for headlights
to pick up painted lines and curbs without these glass beads. Consequently, it’s
necessary for asphalt sealcoating companies to understand how to properly
use these beads and make the most of them.
The road marking paint is not very reflective on its own
so that has an issue when cars are driving at night. Reflective glass beads for road marking paint is the best solution since these
beads reflect light back towards the source. This principle is
retro-reflectivity.
In
line paint, when the car headlights collide with the reflective glass beads in
the paint, a retro-reflectivity occurs. The
light reflects back to the car and driver. This allows people to park correctly
in the dark, maintain the lane while driving, and so on.
Reflective
glass beads for road marking paint come in
various sizes. Supply companies use micrometers or sieve mesh sizes to
represent these dimensions. Usually, local companies make final decisions on
the mixing of bead sizes based on local conditions.
In
addition to size, another important factor is the refractive index (RI). In
reflective glass beads, the higher
the refractive index, the higher the reflectivity of the glass beads is.
Regardless
of the method used, the line paint must be liquid
when using reflective glass beads for painting. Otherwise, the beads will not stick. In addition,
the application requires timing so that the beads only sink about 50%.
Otherwise, they will lose the quality of reflection they should have.
Equally
important, reflective glass beads should not be mixed with paint. The beads
must be located on top of the paint to capture light. Mixing them together may
seem easier, but only a few beads can reflect light back. This goes against the
purpose of installing reflective beads for line paint.
The
simplest way to add reflective glass beads to line coatings is to use a
machine. Most line painters offer automatic reflective bead applications. This
feature also automatically assigns beads, which is a unified benefit.
Another
option is to manually apply. For this purpose, the company uses containers with
holes. Then, the worker only needs to shake the beads onto each line. This
method requires more consideration and attention to local conditions in order
to obtain high-quality finishes.
TORY supplies high retro-reflective road marking glass beads, 1.7 refractive index glass beads and special glass beads for road marking, etc. And they all can be customized according to customer requirements.
To know more: https://www.cntory.com/
Email:Echo@cntory.com
scan to wechat: