other
Prevention of marking lines cracking
Feb 23, 2023

Prevention of marking lines cracking





To prevent the road markings line get cracked, except choosing the qualified raw materials and proper preparation of the road surfaces. The application under favorable conditions is required, the following precautions should be taken when construct with thermoplastic paint.


1. Put the paint into the reaction kettle to heat up. The temperature should be increased step by step. Stir while heating, and do not heat it violently, which may cause cracking due tolocalpartial overheating.


2. Stirring for a sufficient time, wait until the temperature of the upper and lower layers is consistent, and the materials are completely mixed evenly before starting to draw the line.


3. Try to draw the lines at a time with small temperature difference between air and ground. If in summer, the ground temperature is the highest at noon and should be avoided, the suggested time is from 6:00 am to 10:00 am and 4:00 pm to 7:00 pm


Tory produces reflective glass beads, the high-quality glass beads for thermoplastic road marking paint, and we can provide the technical support on paint and construction. Please learn more about our products through the link below.

https://www.cntory.com/contact-us_d2


leave a message
welcome to cntory
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact