Common Reasons and Solutions for Two-Component Spraying Road Markings When They Cannot Be Dry

It’s universally acknowledged that the two-component road markings are much sturdier, more wear-resistant and have longer reflective lifespan than the usual ones. There is no doubt that the two-component paint will have a wide application prospect for its two outstanding characteristics. With the advancement of paints and upgrading of equipment, the construction for two-component road markings is becoming simpler and more convenient. However, there are still many issues that need to be noted during the construction process. In particular, it’s very common that spraying road markings cannot be dry, which not only causes interference with construction progress, but also takes more time, labor and materials to be redone.

Today, Anhui Tory will try to introduce you to some common reasons for why road markings cannot be dry and methods about how to solve this problem.

1. Inappropriate construction temperature
Solution: Ensure that the temperature is above 0 ℃ during spraying, and the temperature is above 5 ℃ during screeding. Avoid construction under extreme temperature.

2. No curing agent added
Solution:Remember to add curing agent to B-component paint and mix them thoroughly before construction.

3. Uneven mixing of curing agent
Solution: Mix the B-component paint with the added curing agent thoroughly for 3-5 minutes.

4. Too little curing agent
Solution: Add curing agent in accordance with the instruction ratio or manufacturer’s suggestion.

5. Inconsistent viscosity between A-component paint and B-component paint
Solution:When the viscosity is inconsistent between two paints, it can be adjusted by adding a diluent or by replacing the repair kit. It can also be solved by installing a hydraulic distributor.

We propose to arrange given QA Specialist to observe the condition of road markings during the construction process. So that once problems are identified, they can be dealt with in time. We believe perfect road markings can be done provided we pay attention to the whole process.

Tory For Your Paint Needs MMA two-component road paint is recommended for achieving a high quality, durable, and long-lasting road marking job. Besides, MMA traffic paint can be firmly bonded to a variety of substrates. The safety and visibility of road markings can be improved by mix MMA with glass beads to form a high-reflective road surface.

As a leading manufacturer of traffic safety materials with more than 30 years’ experience, Tory is committed to ongoing product development and excellent customer services that makes us the perfect partner for your road marking paint supply needs. For more information, or to get started on your MMA two-component traffic painting solution: https://www.cntory.com/

Feel free to contact us:
Email: Echo@cntory.com
WhatsAPP: +8617355287086