-
Jan 26,2024
Introduction of Common Defective Glass Beads Ⅰ.Oval glass beads (see Figure 1) When the ratio of the major diameter D to the minor diameter d is greater than 1.3 (D/d >1.3), the oval glass bead shall be considered defective. Figure 1- Oval Glass Beads Ⅱ. Satellites (see Figure 2) When a ...
read more
-
Mar 06,2024
What Resin Is Used for Different Types of Road Marking Paints Road marking paints are essential for providing clear guidance and safety on roadways. Resin is commonly used as a binder in road marking paints to improve adhesion, durability, and visibility. Here are some types of resin used for different road marking paints: 1. Thermoplastic Resin: Thermoplastic road marking paints are w...
read more
-
Mar 11,2024
Why Are the Road Markings Not Removed and Repaved, but Repainted and Covered with Glass Beads? For a number of reasons, road markings are usually scattered with glass beads and repainted rather than removed and repaved. Cost-effectiveness: In general,Repainting road markings and scattering glass beads is far less expensive than removing and repaving the road. This is due to the fact that re...
read more
-
Mar 18,2024
Influence of Construction Temperature on Hot-Melt Markings The construction temperature of hot-melt marking paint generally refers to the temperature of the marking car hopper, which usually requires that the material in the hopper should be maintained at 180-220 ° C. When the melt temperature of hot melt marking paint is too high, the volatilization of additives in the paint is accelerated. At th...
read more
-
Mar 29,2024
What Is Real High Reflective Road Marking? Road Marking owns a long history and plays a crucial role in traffic safety by giving out people’s warning so as to protect them from accidents, and that’s exactly the reason why the high reflectivity of the road marking should be stressed. But do you really understand what real High Reflective Road Marking is? According to China’s latest standards for ro...
read more
-
Apr 02,2024
Introduction of Common Defective Glass Beads Ⅰ.Oval glass beads (see Figure 1) When the ratio of the major diameter D to the minor diameter d is greater than 1.3 (D/d >1.3), the oval glass bead shall be considered defective. Figure 1- Oval Glass Beads Ⅱ. Satellites (see Figure 2) When a glass bead supports more than two smaller glass beads, called satellites, or when, in the case of two satelli...
read more
-
Apr 07,2024
Why Two-Component Marking Paints Are More Suitable for Heavy Traffic Sections? There are roughly three types of road marking paint on the market, namely: waterborne marking paint, hot melt marking paint, and two-component marking paint. So, what are the differences between these types of markings, and which type is more suitable for heavy traffic sections? 1. The wate...
read more
-
Apr 12,2024
How to Solve Bubbles in Road Markings? All roads should be clean and dry during the marking construction. Moisture is the most harmful factor in the adhesion of paint and pavement. The amount of moisture in the ground is enough to affect proper coating adhesion. Early morning dew and fog usually result in wet roads. If there is too much moisture on the road surface, it usually leads to blistering ...
read more